Bright, clear, and easily visible day or night, the IS35
offers a smart interface to engine data, fuel
efficiency, depth history and more. Connected to your
vessel’s NMEA 2000 network, the IS35 automatically
detects and displays the most relevant information
available on a series of pre-set and user-customisable
data pages. With an installation cutout matching
traditional analogue gauges, the IS35 is a hassle-free
upgrade for any new build or refit.
Bright, full-colour opticaly bonded LCD display
Simple button-driven menus
Automatically displays data from NMEA 2000 engines
Monitor up to two engines per gauge
Pre-set pages for engine monitoring, fuel economy,
cruising, steering, and depth history
Easily customise pages
Surface or flush-mount
Bright & Clear Colour Display
The IS35 features a 3.5-inch optically bonded LCD display
with clear 320x240-pixel resolution and bright LED
backlight. White ‘day’ mode provides high brightness and
contrast for use in full sunlight, while red ‘night’ mode
offers more subtle illumination for use in low-light
Easy To Use
Data is displayed on the IS35 as a series of pages, with
pre-set pages for engine monitoring, fuel economy, cruising,
steering, and depth history. A simple four-button interface
makes it easy to switch between pages, change brightness
quickly to reflect the conditions, and modify other settings
on the go.
Easy To Set Up
When connected to the NMEA 2000 network aboard your boat,
the IS35 automatically detects other connected equipment
including engines; fuel flow, engine temperature, and water
pressure sensors; GPS receivers; depth transducers; and much
more. The IS35 automatically displays the most relevant
information available on its pre-set data pages, eliminating
the need for a complicated and time-consuming setup process.
Easy To Install
The IS35 is designed to fit standard 85mm (3 3/8”) circular
cut-outs, for direct replacement of traditional analogue
speed or RPM gauges. Surface-mounted, it has a low 8mm
profile, matching the stylish Glass Bridge design of our NSS
evo2 multifunction displays. The IS35 can also be flush
mounted using an optional rear-mounting bracket. Electrical
installation is simple, with both power and data over a
single NMEA 2000 cable.
Engine Monitoring Page
Monitor critical engine data for one or two engines,
including alternator potential, engine temperature and water
pressure, hours used, oil pressure and temperature, boost
pressure, and trim. The IS35 connects to any marine engine
supporting NMEA 2000, and many others via an optional J1939
to NMEA 2000 converter.
Fuel Economy Page
An accurate, real-time view of fuel usage helps to identify
your optimal cruising speed and RPM, letting you maximise
your engine’s fuel economy and get the most from your fuel
budget. With a compatible engine, fuel flow sensors, and
tank level sensors, the IS35 can display instantaneous fuel
flow, fuel used and remaining, rate of consumption, and fuel
economy in miles per gallon.
Dedicated Cruising Page
The IS35’s dedicated cruising page automatically displays
the most relevant information for power boating, based on
available engine data and speed sensors. Central to the
display is an analogue-style RPM display, with support for
dual engines. The cruising page also incorporates easy to
read bar graphs for trim setting and engine temperature, and
digital displays for speed, depth, fuel economy, and fuel
Motor Steering Page
A pre-set steering page provides key navigational
information from other NMEA 2000 connected instruments
including waypoint position, distance, and time to
destination. The IS35’s course deviation indicator (CDI)
provides a clear graphical representation of your boat’s
distance from its plotted course.
Depth History Page
When networked with an NMEA 2000 depth transducer, or
multifunction display with built-in echosounder, the IS35
can show a graphical depth history, with digital displays of
current depth and water temperature.
The IS35 is designed to automatically display the most
relevant data available from your vessel’s NMEA 2000
connected engines and sensors. However, you’re free to
customise its pre-set data pages to display your choice of
information from any NMEA 2000-connected devices aboard.
Easily create your own pages incorporating analogue-style
gauges, bar graphs, and digital displays, in a variety of
layouts, to suit your needs at the helm.
more information and availability please contact us.