|
||||
If you can not see our "Pop-Up Menu" here... IE is restricting our webpage from running scripts, click at the IE information bar & then click "Allow blocked content..."
If you still have problem, please use our Site Map |
Tryad System
A Tryad system is composed of two major parts: The T1 CPU, redefining the term “CPU” within an instrument system. The T2 Multiplex Wind/Boatspeed/NMEA input Interface.The T3 e/Series -Optional- interface (all formats) can be added to enhance the system's additional features.
The T1 Tryad CPU steps up to a new level of performance and capability. As you may know, our standard model 001 CPU - the gray box - acts as a power supply and CPU with all sensor inputs and auxiliary functions provided by “upstream” interfaces. With upgraded switching power supply and PC104 based processor includes a number of important functions at CPU level, processor speed and computing horsepower are boosted far beyond the 001’s Z80 chip (Selectable Processor type 8086 to Pentium level), with software modification and upgrade access enhanced through Compact Flash storage.Backwards Compatible with pre-Tryad Ockam systems Enhanced T1 models will feature Optional Internet Protocol connection, with Ethernet virtual Serial port data routing.
T2 Wind/Boatspeed/NMEA Interface The Tryad T2 interface combines the functions of the 022 and 015 models Wind and Boatspeed interfaces with a third NMEA serial input (Compass or Depth for example). A MEMS device on the circuit board provides heel measurement. The T2 interface enclosure is the rugged, water resistant e/Series type, greatly enhancing total system durability in the often-harsh onboard environment. Additionally, T2 will act as the basis for special analog sensor interfacing such as Stringpot displacement, barometer/temperature, and rudder/Trimtab.
T3 e-series Interface Serial output sensors not addressed with T1/T2 system may be added with a T3 interface. Already in full production, and based on the highly successful e/Series interfaces, the T3 Serial Interface both completes the new Tryad system and ensures continued support of older 001 CPU based Ockam setups.
Products are shown for unit ID only
For more information please contact us. |
|||
Contact us, Write, Fax, E-Mail,
Call M-F [9.00am-5.00pm Central US (- 6h
GMT)] at:
Chicago Marine Electronics
USA Marine Electronics, Communication, Navigation, Autopilots & Instrument Marine products.
Fraud Alert: Fraudulent use of the [email protected] email addresses, spam emails are send via email communication messages to undisclosed recipients by unauthorized senders, if you are not expecting an email from Hellas Marine or Chicago Marine Electronics please disregard and delete the email, we apologize for any inconvenience and thank you for your understanding. Created by Hellas Marine Inc.
www.chicagomarineelectronics.com
|