|
|
If you can not see our "Pop-Up Menu" here... IE is restricting our webpage from running scripts, click at the IE information bar & then click "Allow blocked content..."
If you still have problem, please use our Site Map |
GMS 10 Network Port Expander
The GMS 10 Network Port Expander allows you to connect
multiple chartplotters and sensors over the Garmin
Marine Network. With this robust 100 MB switch, you can
connect multiple MFDs and sensors to the Garmin Marine
Network and gain the benefit of Ethernet-like data
transfer speeds up to 10 times faster than some
competitive systems.
PN 010-00351-00 $ 249.99 USD
NMEA 2000® Starter Kit : Includes an NMEA 2000 drop cable (2 m), NMEA 2000 backbone cable (10 m), NMEA 2000 power cable (2 m), two NMEA 2000 T-connectors, NMEA 2000 male terminator and NMEA 2000 female terminator.PN 010-11442-00 $ 99.00 USD
NMEA 2000® Network Updater
Our NMEA 2000 network updater provides the convenience
of updating Garmin products and NMEA 2000 accessories
that do not have an SD™ card slot. Simply download a
software update to an SD card and insert the card into
the network updater. Using a simple plug & play
installation, the network updater easily and
temporarily¹ connects to your NMEA 2000 network.
PN 010-11480-00 $ 79.99 USD
NMEA 2000® Transducer Adapter Kit
With the NMEA 2000 Transducer Adapter Kit, you can save
both time and money by upgrading your depth transducer
to NMEA 2000 without hauling your boat out of the water.
Use our kit to adapt depth information, which is
currently provided by an installed Airmar® P19, B60 (or
compatible) 200 kHz transducer on a boat, to the NMEA
2000 network. Once adapted, you can observe depth
information on compatible Garmin display devices that
are connected to their NMEA 2000 network. PN
010-11525-00 $
149.99 USD
NMEA 2000 Power Isolator
The NMEA 2000 power isolator is useful to ensure proper
installation of the NMEA 2000 network in separating
different power sources that could power the bus. Some
NMEA 2000 capable engines can potentially provide power
to the NMEA 2000 bus. The NMEA 2000 power isolator is
useful because it makes sure the NMEA 2000 power from
the engines and system power are kept separate.
PN 010-11580-00 $ 20.00 USD
NMEA 2000® Inline Terminator PN 010-11096-00 $ 15.45 USD |
|