|
| |
H3000 Graphical Pilot Display

The H3000 Graphical Pilot Display (GPD) succeeds the H2000 Pilot Display and
adds the graphical abilities and construction of the GFD to Pilot control.
H3000 Graphical Pilot Display Technical Specification
|
|
|
|
|
Dimensions |
|
178 x 114 x 56mm |
| |
Construction |
|
Molded ABS with
aluminum rear case and toughened glass window |
| |
Weight |
|
0.7kg |
| |
Sealing |
|
IP67 |
| |
Operating
Temperature |
|
-10 to 55°
Celsius |
| |
Humidity
Range |
|
Up to 95% rh |
| |
Supply
Voltage |
|
12V (10 - 16V
range) |
|
Power
Consumption (lights on/off) |
|
190mA / 140mA |
| |
Interfaces |
|
FastNet |
NEW
Pilot ACP Processor
|
Pilot ACP
(Advanced Control Processor)
Computes
and provides the power which drives the ram/pump.
|
-
The
NEW ACP with an even more powerful microprocessor makes
adjustments for course and conditions, imitating and exceeding the
sharpest steering skills.
- It achieves this by constantly monitoring information from sensors
such as boat speed, wind speed/direction, compass and heel angle, adapting
itself to the conditions and then applying a sensitive controlled
reaction.
- Improved response and rudder drive control using "smart"
functions optimizes power supply usage.
- New "Autoswitch" protects against crash gybes and accidental
tacks.
- Enhanced Rudder algorithms - evolved and tested with grand prix
solo racers.
- Advanced Gyro Technology using yaw
rate, pitch rate and heel rate provides more accurate and responsive
steering ability especially downwind and in heavy weather.
- Designed for all applications: power / sail, mono / multi hull, up to
any size.
- Wireless Remote Control Display
|
|
Functions |
| Steer to Compass |
Set Course
Set Next Leg |

RemoteVision
Bluetooth Wireless
Remote
Control & Display |
| Steer to Wind |
Steer to Apparent Wind
Smart Tack
Smart Gybe |
| Steer to Waypoint |
Set Course
Waypoint Arrival and Next Leg |
| Power Steer |
Set Fine Rudder
Set Coarse Rudder |
| Race Function |
Steer to optimum wind
angle |
|
Pilot Processor
ACP Types 1&2, specifications |
|
Construction: |
Zinc
casing with BNC and rubber grommet cable entry |
|
Weight: |
3.1kg (6.8lbs) |
|
Electrical: |
12V dc nominal / 10V -
16V (Type 1) 12/25 dc nominal / 10V - 32V |
|
Drive Types: |
Size 1 Hydraulic Ram,
Size 1 (12V) Hydraulic Pump, Rotary Drive, Stern
Drive Unit |
For
more information please contact us.
|